The most popular plastic machinery industry in Chi

  • Detail

China's plastic machinery industry should grasp the policy opportunity period

the development of plastic machinery industry reflects the national economic and technological development level of a country and region to a certain extent. At the same time, plastic machinery is an important international trade mechanical and electrical products, accounting for a considerable proportion in international trade. To this end, governments and relevant industry management departments all attach great importance to the development of plastic machinery industry

analysis of favorable factors for the rapid development of China's plastic machinery industry China's plastic machinery has become one of the most rapidly developing industries in the traditional machinery manufacturing industry, with an increase in annual demand. In the next few years, China's plastic machinery industry will continue to grow

it is understood that the rapid development of China's plastic machinery industry is due to the following factors: the rapid development of China's plastic processing industry has a strong demand for plastic machinery; The demand for high-tech equipment leads to the renewal of equipment and the elimination of obsolete equipment. It can be seen from the statistics that it is the growth in the output of plastic products that leads to the growth in the sales of plastic machinery. The good development prospect of plastic processing industry will still be the main driving force for the rapid development of China's plastic machinery industry

the reasons and achievements of the rapid development of China's plastic machinery industry after China's entry into WTO have brought at least two favorable conditions to the development of China's Plastic Machinery Industry: first, it is conducive to export; Second, it is conducive to the introduction of technology, including advanced manufacturing technology brought about by foreign joint ventures and wholly-owned enterprises in China. China is a large plastic machinery producer in the world, but its export value has only accounted for 5-10% of the total sales value for many years, which is very disproportionate to the fact that the export value of advanced plastic machinery countries such as Italy accounts for about 50% of its total output value. According to the current production capacity and export potential of China's plastic machinery, increasing export should be one of the basic ways for our further development. We must make full use of the opportunities brought by China's entry into WTO, strive to create conditions and increase exports, so as to expand the development space of China's plastic machinery industry

the recent popular production of plastic containers for beer filling, plastic bottles for hot beverage filling and aseptic filling has exposed the gap between domestic plastic machines and the world's advanced level. It is reported that BOPP bottles have come out with the performance of PET bottles, but the cost has been reduced by 20%, which is of great significance for a wide range of large quantities of beer drinks, and also puts forward new requirements for plastic packaging machinery

after the reform and opening up, with the rapid development of the plastic industry, the market demand for the equipment of an innovative team of the plastic molding and Haizheng group has increased significantly. Many enterprises have introduced advanced technology and design from abroad and digested and absorbed them by means of joint ventures, cooperation and purchase of production and manufacturing licenses with similar foreign enterprises, so that China's plastic machinery industry has been significantly improved, and the products have begun to initially meet the general needs of the plastic processing industry

in the 1990s, due to the continuous emergence of new plastic materials, the application fields of plastics have expanded rapidly from general civil and agricultural to almost all industrial fields, such as aerospace, national defense, petrochemical, automotive, home appliances, construction, packaging, communications, computers and other industries. Plastic machinery manufacturing enterprises have also broken the pattern that most of them were limited to light industry, machinery and chemical industry systems. They have rapidly sprung up in various industrial systems, military industry and township enterprises. Relying on the key development areas of the plastic industry, their product categories have adapted to them, forming a more obvious regional structure layout

for example, the production of injection molding machines is relatively concentrated in Ningbo, Zhejiang, Hangzhou, southern Guangdong, Shanghai and Wuxi, Jiangsu. Among them, Ningbo has the fastest development momentum and has become the largest production base of injection molding machines in China. Its annual production volume accounts for 50% of the total annual output of domestic injection molding machines, accounting for 1/3 of the world's injection molding machines; Extrusion production lines are relatively concentrated in Shandong and Shanghai in the East, Wuhan and southern Henan in the middle, Beijing and Dalian in the north; Plastic weaving equipment is mainly concentrated in Changzhou, Jiangsu and Lanzhou, Gansu; Co rotating twin screw extruders are mainly located in Nanjing, Jiangsu, Lanzhou and Dalian, Gansu; The mixing equipment is mainly located in Zhangjiagang, Jiangsu and some areas of Liaoning; Screw and barrel, the key components of extrusion molding machine and injection molding machine, are mostly located in Zhoushan, Zhejiang and Nanjing, Jiangsu; And all kinds of plastic molds are concentrated in Huangyan Area of Zhejiang Province and some areas of Anhui Province. At present, most enterprises in Shantou, Guangdong have introduced the latest computer automated mold processing technology from Germany, France and Italy, which has greatly improved the technical performance and quality of plastic molds

in terms of specialized collaborative production, with the progress of industrialized production of plastic machinery in China, most Chinese enterprises have realized the importance of specialized collaborative production. The original large and complete, small and complete situation is gradually changing. Many enterprises have eliminated general workshops such as casting and turned to outsourcing manufacturing; Some key components of the equipment, such as barrel and screw, are also outsourced in the production area; Some auxiliary equipment required by the equipment, such as hopper and feeding device, can be purchased in the professional cooperative factory

in terms of product competitiveness 3. Pu stadium finish: 100% water-based silicon Pu finish, the function price ratio of China's plastic machinery products is acceptable, which can basically supply the general technical equipment required for the processing of domestic plastic raw materials and the processing and molding of plastic products. Key enterprises in the industry have made breakthroughs in a number of independent products, such as SCJ230 single and double-layer storage plastic extrusion hollow forming machine, special conical twin-screw extrusion equipment for wood plastics, large-diameter double wall corrugated pipe production line and large-diameter steel anti-corrosion (3PE) drag reduction (resin) internal and external composite pipe production equipment, which have reached the international advanced level in the same period

in terms of market network construction, after years of efforts, most enterprises in the field of plastic machinery and national organizations in this industry in China have basically transformed their marketing system from the allocation system of the original planned economy to the mode of the initial market economy. The sales network of each enterprise is all over the country; The agency mechanism is gradually becoming standardized; The professional market of plastic machinery organized by national industry associations has played a positive role; The large-scale international and domestic exhibitions and exhibitions organized by the industry associations and national professional companies attract a large number of Chinese and foreign exhibitors and visitors every year; The use of modern means of communication for internal and external publicity campaigns have also been launched

in terms of the construction of scientific and technological team, many plastic machinery manufacturing enterprises developed from non-standard manual workshop small enterprises, and the technical force was extremely lacking before the reform and opening up. With the continuous development of the industry, the team of scientific and technological personnel is also growing. Since 1992, the proportion of scientific and technological personnel in enterprises has been maintained at more than 10%. The stability of the scientific and technological team provides talent guarantee for the upgrading of enterprise products and technological progress

at present, nearly 10 colleges and universities in the industry have set up the specialty of plastic molding machinery, and generally have master's training qualifications, of which two key universities have set up doctoral programs. There are 3 national professional research centers (National Engineering Research Center for new polymer forming equipment, plastic machinery technology development center and national mold research center), 4 national enterprise technology centers, 16 provincial enterprise technology centers and 38 municipal enterprise technology centers. There is one of the first batch of national innovative enterprises and three provincial and municipal innovative enterprise pilot units. There are nearly 2000 teaching and scientific research personnel in the whole industry, and 30 industry experts in the first batch

the number of professional and technical personnel continues to increase, and the scientific research results are quite abundant. Among them, a considerable part of the electromagnetic dynamic extrusion and injection plastics developed by the National Engineering Research Center for new polymer molding equipment and put into industrial production and the cement enterprises can not meet the requirements of the plasticization device, which has made a revolutionary breakthrough in the theory and practice of plastic plasticization in the world, and has obtained patents from dozens of western developed countries. Most backbone enterprises have established close cooperative relations with universities and scientific research institutes. For example, they have cooperated with Tsinghua University, Beijing University of chemical technology, South China University of technology, Zhejiang University, East China University of technology, Nanjing University of technology and other universities and scientific research institutes such as the Chinese Academy of Sciences. They have established a scientific and technological innovation system with enterprises as the main body, market as the guide and the combination of industry, University and research, and actively carried out joint research and cooperative innovation activities, Further enhanced the ability of independent innovation

China's entry into WTO has further improved the international market environment of China's plastic machinery industry. The plastic machinery industry should seize the opportunity, make full use of relevant policies, give full play to the advantages of low labor cost, social stability and sustained growth of GDP in the local (domestic market), practice hard and take effective measures to make China's plastic machinery industry, which has always been the first in China's machinery industry in terms of production efficiency, create a new glory with a higher average annual growth rate

Copyright © 2011 JIN SHI